If you require a forklift skip with a low overall height to fit into spaces where height is restricted (e.g. below a swarf conveyor or press) then our Low Loading Swarf skips would provide the ideal solution.

Designed purposely with a lower overall height than our conventional tipping skips, our swarf skips are suitable for collecting debris such as swarf, scrap, machined parts or blanks.

With a water tight construction, you can be sure our swarf skips will collect your debris whilst ensuring no liquid is leaked onto the factory floor.

With a mild steel construction, manufactured from 3mm side plates and 5mm base and rear plates, the swarf skips can also come supplied in a variety of colours if needed, and like all our forklift attachments, are fully tested and certified for compliance with the latest Health & Safety Regulations.

Low Loading Swarf Skip features:

• Manufactured with a low overall height, suitable for placing under swarf conveyors or presses.
• Fully welded seams, ensures skips are liquid proof to prevent any liquid leakage onto factory floor.
• Simple to operate release handle ensures skip contents are emptied with no manual handling.
• Heavy duty steel under frames to ensure long service life properties.
• Safety security chains ensure skips are safely retained to the lift truck without risk of slipping off the truck forks.
• ‘CE’ marked and supplied with Certificate of Conformity to meet Health & Safety Regulations.

For more information please contact us here. Make sure to follow us over on Facebook here to keep up-to-date with everything Langley related.

The post Low Loading Swarf Skip appeared first on Langley Mechanical Services.

Our range of forklift tipping skips and tipping bins are ideal for placing in production or storage areas to help keep working areas clear whilst allowing safe and speedy removal of scrap or rubbish.

This heavy duty range of Galvanised forklift tipping bin has all the same design characteristics as our heavy duty painted tipping bins, but comes with a hot dipped Galvanised finish, making them ideally suited for working in corrosive environments or where corrosive waste is being put into the skip.

The heavy duty nature of the bins also makes them suitable for working with material of a robust nature.

Manufactured with a heavy duty 5mm thick steel body and heavy duty under frame, our heavy duty range of Galvanised tipping bins are the perfect solution to waste handling when non corrosive properties are required.

Like all our forklift attachments, all tipping bins come supplied fully tested and certified for compliance with the latest Health & Safety Regulations.

Galvanised Tipping Bin – Heavy Duty features:

• Manufactured from mild steel with a hot dipped Galvanised finish, offering non-corrosive properties.
• Heavy duty body and steel under frames ensures long service life properties in the most arduous of conditions.
• Full width release handles to eliminate the need to have to lean in between the skip and the truck mast for tipping.
• Heavy duty steel under frames to ensure long service life properties.
• Twin locking mechanisms for added safety to ensure safe locking when skips are loaded unevenly.
• Pre-drilled castor plates to allow retro fitment of castors if need be (no onsite welding required).
• Safety security chains ensure skips are safely retained to the lift truck without risk of slipping off the truck forks.
• Pull cord fixing points to both left and right hand sides, allows easy retro fitment if required.
• Bolted tipping handle assembly allows easy replacement if required (no welding required).
• ‘CE’ marked and supplied with Certificate of Conformity to meet Health & Safety Regulations.

For more information please contact us here. Make sure to follow us over on Facebook here to keep up-to-date with everything Langley related

The post Galvanised Tipping Bin – Heavy Duty appeared first on Langley Mechanical Services.

Our range of forklift tipping skips and tipping bins are ideal for placing in production or storage areas, to help keep working areas clear whilst allowing safe and speedy removal of scrap or rubbish.

This galvanised range of forklift tipping bins has all the same design characteristics as our painted tipping bins, but comes with a hot dipped galvanised finish, making these tip skips ideally suited for when working in corrosive environments or where corrosive waste is being put into the skip.

Manufactured with a regular duty 3mm thick steel body and heavy duty under frame, our galvanised range of tipping bins are the perfect solution to waste handling, when non corrosive properties are required.

Emptying of the forklift skips contents is carried out by a simple to operate release mechanism. This, when activated, allows the tip skip to roll forward and empty.

Like all our forklift attachments, all tipping bins come supplied fully tested and certified for compliance with the latest Health & Safety Regulations.

Galvanised Tipping Bin – Regular Duty features:

• Manufactured from mild steel with a hot dipped Galvanised finish, offering non-corrosive properties.
• Regular duty 3mm thick steel tipping bin ensures strong, durable properties.
• Full width release handles to eliminate the need to have to lean in between the skip and the truck mast for tipping.
• Heavy duty steel under frames to ensure long service life properties.
• Twin locking mechanisms for added safety to ensure safe locking when skips are loaded unevenly.
• Pre-drilled castor plates to allow retro fitment of castors if need be (no onsite welding required).
• Safety security chains ensure skips are safely retained to the lift truck without risk of slipping off the truck forks
• Pull cord fixing points to both left and right hand sides, allows easy retro fitment if required
• Bolted tipping handle assembly allows easy replacement if required (no welding required).
• ‘CE’ marked and supplied with Certificate of Conformity to meet Health & Safety Regulations.

For more information on Galvanised Tipping Bin – Regular Duty please contact us here. Make sure to follow us over on Facebook here to keep up-to-date with everything Langley related.

The post Galvanised Tipping Bin – Regular Duty appeared first on Langley Mechanical Services.

Manufactured to a smaller size than our standard range of forklift tipping skips, this mini tipping skip is ideal for placing underneath metal punching machines and other machines where collection of small metal etc is required.

The miniature size of this tipping skip makes it suitable for placing in areas of confined space, and with castors fitted as standard, the skip is easy to manoeuvre and position accordingly.

The skip is suitable for accepting forklift forks up to 140mm wide x 60mm thick.

Tipping Skips – Mini features:

• Regular duty 3mm thick steel tipping bin ensures strong, durable properties.
• Full width release handles to eliminate the need to have to lean in between the skip and the truck mast for tipping.
• Heavy duty steel under frames to ensure long service life properties.
• Twin locking mechanisms for added safety to ensure safe locking when skips are loaded unevenly.
• Safety security chains ensure skips are safely retained to the lift truck without risk of slipping off the truck forks.
• Pull cord fixing points to both left and right hand sides, allows easy retro fitment if required.
• Bolted tipping handle assembly allows easy replacement if required (no welding required)
• ‘CE’ marked and supplied with Certificate of Conformity to meet Health & Safety Regulations.

For more information please contact us here. Make sure to follow us over on Facebook here to keep up-to-date with everything Langley related.

The post Tipping Skips – Mini appeared first on Langley Mechanical Services.

Fully stainless steel in construction, our range of stainless steel tipping skips are designed for use primarily in the food and drinks industry, where corrosion resistance and the minimisation of contamination is vital

Every part of the tipping bin is manufactured from stainless steel, making it suitable for pressure washing or steam cleaning

Our stainless steel tipping skips, with spark proof properties, can come ATEX certified if required allowing for use in potentially hazardous and explosive atmospheres

Tipping Skips – Stainless Steel features:

• Manufactured entirely from stainless steel, offering spark proof non-corrosive properties.
• Regular duty 3mm thick steel tipping bin ensures strong, durable properties.
• Full width release handles to eliminate the need to have to lean in between the skip and the truck mast for tipping.
• Heavy duty steel under frames to ensure long service life properties.
• Twin locking mechanisms for added safety to ensure safe locking when skips are loaded unevenly.
• Pre-drilled castor plates to allow retro fitment of castors if need be (no onsite welding required).
• Safety security chains ensure skips are safely retained to the lift truck without risk of slipping off the truck forks.
• Pull cord fixing points to both left and right hand sides, allows easy retro fitment if required.
• Bolted tipping handle assembly allows easy replacement if required (no welding required).
• ‘CE’ marked and supplied with Certificate of Conformity to meet Health & Safety Regulations.

For more information please contact us here. Make sure to follow us over on Facebook here to keep up-to-date with everything Langley related.

The post Tipping Skips – Stainless Steel appeared first on Langley Mechanical Services.

Similar to our standard range of forklift tipping skip attachments, this model of tipping skip comes supplied with a fully fitted hinged lid, which eliminates the possibility of the skip rubbish from blowing out. For safety and security reasons the lid of this tipping skip can also be locked when closed. With the lid closed, skip odours can also be reduced.

The front of the lid is designed to easily fold back over the rear portion, to allow waste and debris to be collected and disposed.

Like all the other forklift tipping skip models that we manufacture, the design characteristics of our lidded forklift skips have come about from the accumulation of over 40 years industry experience.

Manufactured with a regular duty 3mm thick steel body and heavy duty under frame, our lidded tipping skips are ideally suited for the collection and disposal of waste and rubbish.

With a mild steel construction, our lidded tipping skips can come supplied in a variety of colours to help with your waste segregation, and like all our forklift attachments, come supplied fully tested and certified for compliance with the latest Health & Safety Regulations.

Tipping Skips – Lidded features:

• Fully formed lockable lid to prevent rubbish from blowing out of the skip whilst reducing skip odours.
• Regular duty 3mm thick steel tipping bin ensures strong, durable properties.
• Full width release handles to eliminate the need to have to lean in between the skip and the truck mast for tipping.
• Heavy duty steel under frames to ensure long service life properties.
• Twin locking mechanisms for added safety to ensure safe locking when skips are loaded unevenly.
• Pre-drilled castor plates to allow retro fitment of castors if need be (no onsite welding required).
• Safety security chains ensure skips are safely retained to the lift truck without risk of slipping off the truck forks.
• Pull cord fixing points to both left and right hand sides, allows easy retro fitment if required.
• Bolted tipping handle assembly allows easy replacement if required (no welding required).
• ‘CE’ marked and supplied with Certificate of Conformity to meet Health & Safety Regulations.

For more information please contact us here. Make sure to follow us over on Facebook here to keep up-to-date with everything Langley related.

The post Tipping Skips – Lidded appeared first on Langley Mechanical Services.

Our meshed extension sided ‘Packaging’ tipping skips are the ideal waste skips to choose when you are handling waste that has a low weight to high volume ratio, such as waste paper, cardboard and packaging materials.

This range of forklift tipping skips provide extra cubic volume by utilising 500mm high meshed extensions to the three sides, which in turn gives the tipping skips a higher volumetric capacity and added rigidity without a significant increase in the skips actual weight.

Like all the forklift tipping skip attachments that we manufacture, the design characteristics of our meshed extension sided ‘Packaging’ tip skips have come about from the accumulation of over 40 years industry experience.

Manufactured with a regular duty 3mm thick steel body and heavy duty under frame, our meshed extension sided tipping skips are ideally suited for the collection and disposal of waste and rubbish. Emptying of the forklift skips contents is carried out by a simple to operate release mechanism, which when activated, allows the skip to roll forward and tip.

With a mild steel construction, the tipping skips can come supplied in a variety of colours to help with your waste segregation, and like all our forklift attachments, come supplied fully tested and certified for compliance with the latest Health & Safety Regulations.

Features:

• Raised meshed extension sides, ideal for high volume and low weight material by increasing skips cubic volume
• Regular duty 3mm thick steel tipping bin ensures strong, durable properties
• Full width release handles to eliminate the need to have to lean in between the skip and the truck mast for tipping
• Heavy duty steel under frames to ensure long service life properties
• Twin locking mechanisms for added safety to ensure safe locking when skips are loaded unevenly
• Pre-drilled castor plates to allow retro fitment of castors if need be (no onsite welding required)
• Safety security chains ensure skips are safely retained to the lift truck without risk of slipping off the truck forks.
• Pull cord fixing points to both left and right hand sides, allows easy retro fitment if required
• Bolted tipping handle assembly allows easy replacement if required (no welding required)
• ‘CE’ marked and supplied with Certificate of Conformity to meet Health & Safety Regulations.

For more information please contact us here. Make sure to follow us over on Facebook here to keep up-to-date with everything Langley related.

The post Tipping Skips – Mesh Sided appeared first on Langley Mechanical Services.

Our range of heavy duty forklift tipping bins and tipping skips are ideal for placing in production or storage areas, to help keep working areas clear whilst allowing safe and speedy removal of scrap or rubbish.

The design of our forklift and telehandler tipping skips are the accumulation of over 40 years industry experience.  Manufactured with a heavy duty 5mm thick steel body and heavy duty under frame, our heavy duty range of forklift and telehandler tipping bins are ideally suited for the vigour of more arduous conditions, such as building and construction sites, scrap yards, quarries and steel fabricators.

Emptying of the forklift skips contents is carried out by a simple to operate release mechanism, which when activated, allows the tipping skip to roll forward and empty.

An auto-release mechanism can also be retro-fitted to the tipping skip at any time if tipping at height is a requirement.

With a mild steel construction, the tipping skips can come supplied in a variety of colours to help with your waste segregation, and like all our forklift attachments, come supplied fully tested and certified for compliance with the latest Health & Safety Regulations.

Tipping Skips – Heavy Duty features:

• Full width release handles to eliminate the need to have to lean in between the skip and the truck mast for tipping

• Heavy duty body and steel under frames ensures long service life properties in the most arduous of conditions

• Twin locking mechanisms for added safety to ensure safe locking when skips are loaded unevenly

• Pre-drilled castor plates to allow retro fitment of castors if need be (no onsite welding required)

• Safety security chains ensure skips are safely retained to the lift truck without risk of slipping off the truck forks

• Pull cord fixing points to both left and right hand sides, allows easy retro fitment if required

• Bolted tipping handle assembly allows easy replacement if required (no welding required)

• ‘CE’ marked and supplied with Certificate of Conformity to meet Health & Safety Regulations

For more information please contact us here. Make sure to follow us over on Facebook here to keep up-to-date with everything Langley related

The post Tipping Skips – Heavy Duty appeared first on Langley Mechanical Services.

Our range of forklift tipping skips and tipping bins are ideal for placing in production or storage areas, to help keep working areas clear whilst allowing safe and speedy removal of scrap or rubbish

The design of our forklift and telehandler  tipping bins is the accumulation of over 40 years industry experience. Key features of the tipping skips are there to maximise the usability and safety of the tipping skip for the operator

Manufactured with a regular duty 3mm thick steel body and heavy duty under frame, our standard range of tipping bins are ideally suited for the collection and disposal of general factory waste and rubbish. Emptying of the forklift and telehandler skips contents is carried out by a simple to operate release mechanism, which when activated, allows the tip skip to roll forward and empty

All our forklift and telehandler skips can also be retro fitted at any time with our auto-release mechanism, making the tipping skips ideal for when tipping at height is a  requirement

With a mild steel construction, the tipping skips can come supplied in a variety of colours to help with your waste segregation, and like all our forklift attachments, come supplied fully tested and certified for compliance with the latest Health & Safety Regulations

Features:

• Regular duty 3mm thick steel tipping bin ensures strong, durable properties.
• Full width release handles to eliminate the need to have to lean in between the skip and the truck mast for tipping.
• Heavy duty steel under frames to ensure long service life properties.
• Twin locking mechanisms for added safety to ensure safe locking when skips are loaded unevenly.
• Suitable for retro fitment of auto release kit.
• Pre-drilled castor plates to allow retro fitment of castors if need be (no onsite welding required).
• Safety security chains ensure skips are safely retained to the lift truck without risk of slipping off the truck forks.
• Pull cord fixing points to both left and right hand sides, allows easy retro fitment if required.
• Bolted tipping handle assembly allows easy replacement if required (no welding required).
• ‘CE’ marked and supplied with Certificate of Conformity to meet Health & Safety Regulations.

For more information please contact us here. Make sure to follow us over on Facebook here to keep up-to-date with everything Langley related.

The post Tipping Skips – Regular Duty appeared first on Langley Mechanical Services.

Our Base Emptying Stillage offers a simple means of collecting, moving and safely dumping factory waste whilst utilising your forklift truck

Once full, emptying the dumping containers is a quick and simple operation via it’s bottom opening hinged base, operated by means of a manual wire pull cord. The hinged base, once open, automatically re-locks when the stillage is lowered back to the ground

Our base emptying dumping containers are ideal for placing around the factory or workshop and can prove a great waste handling alternative to conventional forklift tipping skips, especially when space is at a premium. Pallet feet on the underside of the stillage allows for convenient stacking and storage capabilities

With a mild steel construction, the dumping containers can come supplied in a variety of colours to help with your waste segregation, and like all our forklift attachments, come supplied fully tested and certified for compliance with the latest Health & Safety Regulations

Base Emptying Stillage – Manual features:

• Manufactured from 2mm thick steel side plates and 3mm thick base plate, offering long service life properties.
• Base opening operated by a simple to use manual wire pull cord, no mechanical parts to breakdown.
• Base locks automatically when lowered to the ground, helps speed up operations and increased productivity.
• Pallet feet fitted to underside of stillage to allow safe and convenient stacking capabilities where space is at a premium.
• Supplied with safety securing chain to ensure the stillage is positively connected to the lift truck.
• ‘CE’ marked and supplied with Certificate of Conformity to meet Health & Safety Regulations.

For more information please contact us here. Make sure to follow us over on Facebook here to keep up-to-date with everything Langley related.

The post Base Emptying Stillage – Manual appeared first on Langley Mechanical Services.